Jacaranda Tree

The jacaranda tree is a sub-tropical tree native to south-central South America that has been widely planted elsewhere because of its attractive and long-lasting violet-colored flowers. The scientific name of jacaranda tree is Jacaranda mimosifolia. A jacaranda tree is either semi-evergreen or deciduous, depending on the climate it grows in. It is also known as the jacaranda, blue jacaranda, black poui, Nupur or fern tree. Older sources call it J. acutifolia, but it is nowadays more usually classified as J. mimosifolia. In scientific usage, the name "jacaranda" refers to the genus Jacaranda, which has many other members, but in horticultural and everyday usage, it nearly always means the blue jacaranda.

Its bark is thin and grey-brown, smooth when the tree is young but eventually becoming finely scaly. The twigs are slender and slightly zigzag; they are a light reddish-brown. The flowers are up to 5 cm (2 in) long, and are grouped in 30 cm (12 in) panicles. They appear in spring and early summer, and last for up to two months. They are followed by woody seed pods, about 5 cm (2 in) in diameter, which contain numerous flat, winged seeds. The blue jacaranda is cultivated for the sake of its large compound leaves, even in areas where it rarely blooms. The leaves are up to 45 cm (18 in) long and bi-pinnately compound, with leaflets little more than 1 cm (0.4 in) long. There is a white form available from nurseries. The unusually shaped, tough pods, which are 5 to 8 cm (2 to 3 in) across, are often gathered, cleaned and used to decorate Christmas trees and dried arrangements.

Table of Contents


25 - 50 feet

Width-Circumference (Avg)

15 - 30 feet

Approximate pH

5.5 - 8.0

Growth Nutrition of Jacaranda Tree

Yearly applications of a 10-10-10 nitrogen, phosphorous, potassium slow-release granular fertilizer will provide the tree with needed nutrients. An application rate of 1 tablespoon per square foot of soil underneath the tree's canopy is suitable.

It thrives in any type of well-drained soil, even in nutritionally poor areas. The ample flower and leaf litter from the tree itself provides all the fertilizer the Jacaranda needs to grow. However, an extra dose of fertilizer added between May and July will increase the tree's growth rate and flowering ability.

Types of Jacaranda Tree

J. mimosifolia 'Alba' or 'White Christmas': Full-size tree with a similar habit and care needs; grows up to 40 feet tall and 60 feet wide; lush foliage; its white blooms might arrive earlier than other varieties, starting in April in some climates.

J. mimosifolia 'Bonsai Blue': Dwarf cultivar with deep purple blooms; matures at only 10 to 12 feet tall and six to eight feet wide.

Planting Jacaranda Tree

Where to Plant Jacaranda Tree

Jacaranda trees thrive in warm, humid climates and perform best growing in full sun. When deciding where to plant the subtropical tree, choose the sunniest spot in your yard. It is also vital to plant the tree at least 15 ft. (4.5 m) away from any buildings.

It’s good to remember that jacaranda seedlings won’t grow in the shade of other trees.

The planting location for a jacaranda tree should be in fertile, rich loamy soil that drains well. Therefore, if your yard has poor quality soil, you will need to amend the soil with plenty of compost before planting it. This way, you ensure that the ground has enough nutrients to support healthy growth.

How to Plant Jacaranda Tree

The best time to plant a jacaranda tree is between late fall and early spring.

It’s crucial to think about space before digging a hole to plant a jacaranda seedling or rooted nursery tree. A jacaranda tree grows rapidly in a few years. Planting in crowded spaces will result in weak growth.

To plant a blue jacaranda tree, start by digging a hole the same depth as the root ball and twice as wide. Next, place the root ball in the hole and backfill with organic-rich native soil. Ensure that the base of the jacaranda tree’s trunk is about 1” (2.5 cm) above the soil level. Press the ground down as you go to eliminate any air pockets.

Then you should create a mound of soil about 3” (7.5 cm) tall and 30” (76 cm) in diameter around the trunk. Next, thoroughly water the newly-planted jacaranda tree, ensuring the root area is well irrigated.

For the last step, spread a 2” (5 cm) layer of lightweight organic mulch over the jacaranda tree root area to help keep the ground moist and prevent weeds from growing. During the first season, water the soil once a week to help the root system get established.

Growing Jacaranda Tree

How to Grow Jacaranda From Seed

The fruit of the jacaranda tree is a dry round brown pod that is one to three inches wide and typically develops in late summer. To harvest the seeds for replanting, pick the seed pods directly from the tree when they are dry (pods that have fallen to the ground might not contain seeds).

  1. Soak the seeds in water for 24 hours.

  2. Place the seeds on a bed of potting soil in seedling containers or pots. Cover them with a thin layer of potting soil and keep the soil moist. The seeds should sprout in two to eight weeks.

  3. Wait eight months before you transplant the seedlings.

How to Get Jacaranda Tree to Bloom

Jacaranda trees bloom twice a year, once in spring in late May or early June, and again in the fall. The trumpet-like blooms have a freshly fragrant smell, although their decomposition is pungent and foul-smelling when the flowers wither and fall. This tree is on the messier side; sweep and rake the spent blooms as soon as you can to avoid a smelly situation.

For the best result with getting a jacaranda to bloom, plant it in a sunny area with well-draining soil (preferably sandy). Make sure the ground around a jacaranda tree remains moist but not soggy. Protect the tree from harsh winds. Stop fertilizing grass growing nearby a jacaranda. Fertilizer, particularly nitrogen, inhibits flower production.

Jacaranda Tree Care

In general, jacaranda trees are a good choice for large outdoor areas in warm climates. They are resistant to pests and diseases and are moderately drought-tolerant (though they require watering during extended dry periods).

The fern-like foliage usually allows diffuse light to pass through, so growing grass under the tree is possible. But, be aware that the tree can have significant surface roots, disturbing sidewalks or nearby structures. Jacaranda leaves, and particularly the flowers, can create a lot of litter when they drop. This messy habit makes the tree a poor choice near pools, driveways, and patios because of cleanup maintenance. If the debris isn't swept up quickly, it can rot and result in a slimy, slippery mess.

Though jacaranda trees can be grown indoors, they typically will not flower. They must be planted outdoors eventually and are not good for long-term container planting. When grown indoors, jacarandas can attract aphids and whiteflies.


For the best blooming, plant your jacaranda tree in full sun, where it receives at least six to eight hours of sun per day. Smaller jacaranda trees can tolerate light shade if necessary, but a lack of optimal sunlight can impact the amount and vibrancy of their blooms.


Jacaranda trees will do best in well-draining, moderately sandy soil with a slightly acidic pH level. It's also tolerant of clay and loamy soils but should not be planted in any mixture that is considered heavy, wet, or not well-draining. Water-logged soil can lead to an increased risk of root rot and mushroom root rot.


As a general rule, water your jacaranda tree when the top three to four inches of soil feels dry to the touch. These trees need consistent moisture throughout the year and often require additional watering during high heat or drought periods. Water the area around the tree's base. Concentrate most of the water at its drip line (the spot where the water drips off the ends of the branches) instead of near the trunk.

To gauge whether your watering was sufficient, poke a finger or water gauge into the ground up to three inches deep, ensuring the water has seeped down to that depth. Repeat watering this way once a week, increase to several times a week during intense sun or heat periods. Reduce watering to once a month during the tree's dormant winter months.

Temperature and Humidity

Some jacaranda trees can tolerate occasional cold weather days (as low as 20 degrees Fahrenheit), but generally, this species does not thrive in climates with frequent freezing temperatures. This plant prefers heat and humidity but is vulnerable to trunk scald in areas with constant high temperatures.


Feed your jacaranda tree annually with a balanced tree fertilizer, but be careful not to give it too much nitrogen, which can affect flowering. A good fertilizer ratio is 10-10-10 NPK (nitrogen-phosphorus-potassium). If you are fertilizing grass under the tree, chances are the tree is already getting a lot of nitrogen.

Pruning and Propagating Jacaranda Trees


You should prune young jacaranda trees to form one central leader (main trunk) for strength and stability. Avoid pruning beyond that; too much pruning might force it to grow vertical suckers that can distort the tree's shape. Seasonal pruning should be limited to removing only broken, dead, or diseased branches.

Propagating Jacaranda Trees

It's best to plant the seeds of this tree between fall and early spring. You can also propagate this plant from a stem or branch cutting (softwood). Grafting is another method, but it's best done by nursery or horticultural professionals. Propagating via softwood cutting is more advantageous because your plant will bloom much sooner than a plant grown from seed. Also, stem cutting is the more reliable method of propagation because the child plant will be a true copy of the parent. Here's how to propagate by stem cutting:

  1. Use pruning shears or hand pruners to trim off a 1/2-inch to one-inch diameter branch. You'll also need either a clear jar of water or a pot of moistened soilless potting mix (with perlite), or a sandy, loamy mix. If you use the water rooting method, you will eventually need a pot of potting soil to plant the rooted stem.

  2. Take a cutting from a branch that has grown past the bark and contains healthy buds. Cut it just above a node (the point where the leaf grows from the stem). Make at least a one-inch diagonal cut; the longer cut surface encourages rooting. The cutting should be at a minimum of three to four inches long and should have at least three nodes on it.

  3. You can put the cutting in a clear glass or jar of room temperature filtered water until roots form (about two weeks), then plant it into potting soil. While you wait for the roots to grow in the water, replenish the water level with filtered, room temperature water. Or, you can directly plant the cut end in an enriched, moist soilless growing medium. Optionally, you can dip the cut end into rooting hormone to boost its chances of root production.

  4. Place the plant in a bright location but not direct sunlight; direct sunlight can burn or dehydrate the cutting.

  5. Once the water-rooted cutting has roots at least one inch long, replant the cutting into a soilless potting mix. After that, do not transplant the cuttings for at least eight months. Allow the plant ample time to establish its root system. Then, find a more permanent home for the plant outdoors or transfer to a larger pot—at least five gallons or more.

Potting and Repotting Jacaranda Trees

Container-grown jacaranda trees will need to be planted in containers at least five-gallons in size, using a sandy loam potting mix that drains quickly. The soil should be kept moist but not soggy throughout the active growing season.

If you are transplanting jacaranda, do it in the winter after they drop their leaves but before they bud out in early spring. Transplanting them while they are dormant reduces stress and increases the likelihood of success.

In the tropics, these trees grow 50 feet tall, outgrowing containers. But in cooler climates, they can be grown as container trees growing to about eight to ten feet if you annually prune and shape the tree during dormancy to keep it on the smaller side.


As tropical trees, these plants will likely not survive climates that freeze for extended periods. It can handle a cold snap here and there, but beyond that, you're asking for tree death. If your winter temperatures sometimes dip, the tree can tolerate occasional 20 degrees Fahrenheit days with a cold snap here or there. To mitigate any potential winter frosty days, think ahead and plant the jacaranda in a sunny area that has some protection from gusty winds.

When jacaranda trees in pots are taken indoors for the winter, they should be watered less frequently and allowed to dry out a bit. A dry period in the winter triggers more blooms in the spring. Similarly, a soggy, wet winter usually means the tree will produce fewer blooms in spring. Prune the potted plant during the dormant winter period; this keeps your potted jacaranda tree from growing too large. Each year, it becomes more difficult to bring the plant indoors for the winter if you don't prune it.

Pest and Plant Diseases

The jacaranda tree is susceptible to aphids and scale insects, and the glassy-winged sharpshooter can also infest its leaves. You can manage all of these pests with insecticidal soap or horticultural oil.

Disease rarely affects jacaranda trees; however, insects like the sharpshooter carrying the bacteria Xylella fastidiosa can cause trees to develop bacterial leaf scorch. The bacteria block the tree from getting the water it needs. To prolong the tree's life, water it frequently. However, there is no cure for the disease, so ultimately, the tree will not likely survive.

Trees that do not have properly draining soil can develop mushroom root rot. This disease is caused by a pervasive fungus and has no real cure other than removing the dying plant. To confirm this disease, it appears like an area of the bark has blackened and died. Upon peeling back the dead bark, you'll notice a white fungal growth.

Common Problems With Jacaranda Trees

In the U.S., these trees are happiest in the balmiest locations—Hawaii, the South, Southern California, and parts of Texas. They grow remarkably easier there, where the conditions are ideal. Problems crop up most when its water, sunlight, and temperature needs are not being met.

Yellowing Leaves

If your tree is not watered deeply enough, it might not produce enough chlorophyll, causing chlorosis, which causes green leaves to turn yellow. Provide your tree with ample water. Water on a schedule and give your plant a deep watering on overly hot days.

Browning, Dying Leaves

Trees that have developed the insect-borne bacterial leaf scorch disease look like they are deprived of water. Leaves begin wilting, browning, and dropping. The branches and stems dry out and become brittle. There is no cure for this disease. Other potential causes for browning leaves are leaf scorch from too much sun or an overabundance of fertilizer. Check those factors. If the sun is overwhelming for the plant, it might be worth it for you to transplant the tree to a more suitable location.

Dead Leaf Tips

Excessive fertilizing can damage the mineral to salt ratio in the soil, causing dead leaf tips and yellowing leaf edges. If the leaf tips appear to die after fertilizing, it might be the cause of your tree's leaf issues. To correct an overfertilized tree, remove the dying or wilting leaves and water the fertilized soil thoroughly, trying to flush out the fertilizer.

Benefits of Jacaranda Tree

  • The bark and roots of this species are used to treat syphilis.

  • Infusions of the flowers are used to treat amoebic dysentery in Guatemala and Mexico.

  • Flowers, leaves and bark are administered for the treatment of Neuralgia and Varicose Veins and generally against infections.

  • The tree is used to treat hepatitis.

  • In folk tradition the flowers, leaves and bark are used to ease neuralgia and varicose veins.

  • Hot Jacaranda leaf baths treat wounds and skin infections.

  • Tree also helps in the treatment of acne.

  • Teaspoon of juice obtained from the leaves of Jacaranda mimosifolia cures health problems associated with venereal diseases.

  • Leaf extract or juice can also be applied externally for relief from sores or ulcers caused by venereal diseases.

  • Infusion can be used internally for relief from syphilitic sores.

  • Volatile oil obtained from Jacaranda leaves and bark has been found to be effective in the treatment of buboes.

  • It has been used as a natural remedy for treating bacterial infections, gonorrhea, syphilis and leukemia.

  • It is also used to treat neuralgia, varicose veins, acne, treat wounds and skin infections.


  • Timber of J. mimosifolia is used for interior carpentry and poles and to make small items such as tool handles and carvings.

  • It is also used for fuel.

  • J. mimosifolia provides pleasant open shade and is an effective windbreak, but is most widely planted as an ornamental.

  • Bark extracts are also used to suppress the hatching of larval soil nematodes.

  • J. mimosifolia is used as bee forage and is an excellent source of nectar for African honey bees in Ethiopia.

2 views0 comments

Recent Posts

See All